FlyingTyger

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 24, 2023 at 10:30 pm in reply to: Group Build Basics and Info #2481
    FlyingTyger
    Participant

    I am running a similar sized motor and should see similar performance on mine.  I have some Hitec HS-65HB servos I am planning to use.  But am also planning on using two aileron servos instead of a single one as shown on the plan.

    December 26, 2022 at 5:50 pm in reply to: Group Build Basics and Info #2423
    FlyingTyger
    Participant

    I don’t have any experience with RCdude.com, but Cobra motors have a good reputation.

    The motor I am planning to use is fairly equivalent to the Cobra 2814/16.  With a 10×7 prop on 3S I expect about 240watts.  eCalc is estimating about 3lbs of thrust and a top speed around 55mph.

    December 16, 2022 at 9:27 am in reply to: Group Build Basics and Info #2408
    FlyingTyger
    Participant

    Just a little something to keep everyone motivated.

    December 10, 2022 at 4:24 pm in reply to: Group Build Basics and Info #2395
    FlyingTyger
    Participant

    I had a Fun-One and they are good planes.  Fairly Stik-ish.  It has a nice thick airfoil so it slows down nice.  Snappier than Stik, but still has good stall characteristics.

    December 6, 2022 at 2:48 pm in reply to: Group Build Basics and Info #2385
    FlyingTyger
    Participant

    Maybe Ron can post the pdf here for everyone? I don’t see a way to post attachments or pics or anything myself.

    • This reply was modified 2 years ago by .
    November 14, 2022 at 10:27 pm in reply to: Group Build Basics and Info #2339
    FlyingTyger
    Participant

    I’m in, but do not need parts cut. I will be doing an alternative build using foam instead of balsa. I am curious to see how it will compare to the balsa builds.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)