Episode 27

Building spaces, and a few announcements

by

In this episode In this episode of the RC Plane Lab podcast, Ron and Tom talk about their build spaces and go over a few announcements.  Episode 27 Transcript This transcript has been lightly edited for readability. Timestamps are retained. Read the full transcript Join-Path: Line | 2 | … -Raw -Encoding utf8 -LiteralPath (Join-Path … Read more

by

The Balsa Stripper is an amazing tool that can save you a lot of money on pieces of balsa. It can cut balsa pieces up to 1/4″ thick into strips up to 1/2″ wide. Last time Ron bought balsa, each 1/4″ x 1/4″ strip was $1.99, but a 1/4″ x 3″ wide piece was $3.97. … Read more